PowerBook 5300

PowerBook 5300

The PowerBook 5300 was the base grayscale model of the 5300 series of PowerBooks. It had a smaller LCD size than the color models of the 190/5300 series PowerBooks.


Specifications

Spec Details
Release Date August 1995
Discontinuation Date August 1996
Processor PowerPC 603e @100MHz
Bus Speed 33.3MHz
RAM PowerBook 190/5300 Proprietary
- 8MB soldered
- 64MB Maximum
Hard Disk 2.5" IDE
- 500 or 750MB Standard
Display 9.5" Passive Matrix Grayscale LCD @640x480
GPU Chips & Technologies 65225 (Apple ECSC)
- 512KB VRAM
Main Battery NiMH
PRAM Battery 3V Lithium (rechargeable)
Power Supply Barrel Jack
- 24V 1.87A
- Apple M3037
Disk Drives PowerBook 190/5300 Modular Bay with the following available modules:
- 3.5" 1.44MB Floppy Drive
- ZIP Drive
- Others?
PC Cards 2x PCMCIA Slots
Networking None
Other I/O - 1x Serial
- 1x ADB
- 1x Mini-15 Video Out
- 1x HDI-30 SCSI
- 1x Line Out
- 1x Mic In
- Infrared
Pointing Device Trackpad
Minimum Mac OS System Software 7.5.2
Maximum Mac OS Mac OS 9.1

Upgrades

SSD Upgrade

See our page on IDE SSDs for more info.


Resources


Service Manual
Capacitor Reference

Common Faults & Maintenance

Brittle Plastics & Hinge Failure

Like just about every 90s laptop, the PowerBook 5300's plastics are now fragile and brittle. The first place where this will become a problem on one is with the display hinges. The screwposts on both the base side and the LCD side are both known to crack and break. When this happens, further damage to the plastic housing parts will be caused if the hinge continues to be used after the plastic breaks. You're also just about guaranteed to break your LCD cable if you do this.

So, what's the fix?

3D print templates have been made that replace the LCD-side hinge mounts, but these were only designed with the color models in mind. The grayscale models (190 and 5300, no letters after the model name) have a thinner display housing, and I'm about 100% sure that the parts won't fit because of this. It's entirely possible to modify the parts to fit, but that takes someone with a grayscale model and CAD skills. If you do this yourself, please email me if you'd like me to host your STL files here: macdatnet@gmail.com. You can download the hinge fix parts for the color models from the resources page for any of the color models here.

So, for the time being, if you have a 5300 with bad hinge mounts, your only fix is to reinforce them with epoxy and hope that they hold.

Main Battery Leaks

The main NiMH battery in the 5300 is well known for leaking, usually severely. Even when compared to other NiMH batteries, these seem to be especially leak-prone. If you have one, do not leave it in the system to start corroding things.

The CMOS battery in the 5300 is a rechargeable Lithium pack that isn't known for leaking.

Capacitor Failure

The 5300 has a good amount of electrolytic capacitors in it - on the logic board, inverter board, and the LCD (on some models). These capacitors can leak, although it's currently not extremely common. They do fail though, and there have been many known cases of bad logic board caps keeping them from starting. Capacitor Reference info is available on the resources page.

Broken Power Jacks

The 5300's power jack is a tiny, fragile barrel jack. These are known to break off of the board very easily, even back in the day. There's a chance that you may have to resolder yours when you get one.

Misc. less common issues

LCD Vinegar Syndrome

See article: Vinegar Syndrome

Stiff Keyboards/"Binding Key Syndrome"

The keys on the 5300's keyboard can go stiff with age, causing what I call "binding key syndrome", where the keys will bind when trying to press them down from the edges. If your keyboard has this issue, it may be possible to use a small amount of lithium grease to improve it.


Gallery

No images are currently available. If you own a 5300, help the site out by sending some in!



Page last updated (MM/DD/YYYY): 08/14/2024
Update Reason: page rewritten

Back-Navigation

Index < Macintosh Portal < PowerBook Home < PowerBook 5300