Cap Reference for the 520's Logic Board and the LCD panel (Sharp).
Cap Reference for the original 500 series Power Supply
3D printing template for replacing the original hinge mounts on the 520.
If you have a 520, chances are that the clutch cover under the LCD has broken clips. Here's some new ones you can print!
Do not use the hinge fix part itself from this link though. It is missing a couple of cutouts for some structuring, which is why I linked Action Retro's modified version instead. The replacement clips are fine though!
Various useful parts created by jmacz on 68kMLA.org. Hosted with permission.
Also, see this forum thread for more info on these parts, and general info on restoring a 500 series laptop.
Further info on the finished supply (page 7 of this restoration thread)
Same guy from the restoration thread. Tutorial thread and 3D prints for building a new power supply that uses no original parts from an OEM one.
Battery shell blank template. Print this, and use it alongside an original cover with some weights inside so it feels like it's got batteries installed.
Index < Macintosh Portal < PowerBook Home < PowerBook 500 Series Home < PowerBook 520 Home < PowerBook 520 Resources